Sections
You are here: Home → Manufacturing → Special Device → U-modules for assembling control systems → IF Modules of control systems
Document Actions

UIA 16-Ph

UIA 16 is 16-channel interface module intended for 16-channel analogue current inlets of the system Yokogawa

UIA 16_photo UIA16 scheme

 

Description:

 

  UIA 16 is 16-channel interface module intended for 16-channel analogue current inlets of the system Yokogawa. It enables connection of the communicator of the system HART without current loop disengagement.

 

  The input terminals for operation signals are dual serial spring terminals (WAGO). They are identified by a channel number and polarity +- in accordance with identification of I/O modules Yokogawa.

 

  The output connector for cable connection with I/O modules Yokogawa is of Centronics type.

 

  Tips for connection of the communicator HART are accessible after removing the top cover and are identified with a channel number. The same tips can be used if required for informational current measurement in the loop without its disengagement (in voltage as decrease on the sensing resistance 249 Ohm).

 

  UIA16 is mechanically intended for attachment on a bar with the help of a holder made of components Phoenix. The top cover is attached with 4 screws to the lower side.    

 

 

Technical Data:

 

           Channel count:                                                                      16

Signal:                                                                        current max. 20 mA

Supply voltage:                                                          no need

            Total radiated heat output                                         max. 1.6 W

            Weight:                                                                      about 0.2 kg

 

 

Common Parameters of „U“ Series:

  Working environment:                                                           normal, basic ČSN 330300

            Operation:                                                                 continuous and intermittent

            Ambient temperature:                                                +5°C up to +50°C

            Humidity:                                                                    up to 90% without dew formation

            Working position:                                                       random on a DIN bar

            Protection degree:                                                     IP 20

            Dimensions (Phoenix UM- height, width, depth):       112 x 110 x 50 mm

Personal tools